CBIMV-S - Flat Spray Nozzle (Siphon Type)
Features
Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 30 μm or less (*1).
Liquid siphon feed type (liquid pressure device is not required).
Even spray distribution across the entire spray area.
Spray angle of 80º.
*1) Measured by Laser Doppler Method.
| Thread standard | - |
| Pipe conn. size | M3 depth 2 |
| Standard pressure | - |
| Spray angle | 80° |
| Spray capacity | 0.1 - 5.5 ℓ/hr |
| Supply air type | Compressed air |
| Liquid feeding system | Liquid siphon |
| Mean droplet diameter | 20 - 30 μm |
| Air consumption | 3.75 - 92 ℓ/min, Normal |
| Air pressure | 0.2 - 0.4 MPa (ca. 2 bar - 4 bar) |
| Free passage diameter | 0.2 - 0.7 mm |
Applications
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil,
surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.
Structure and Materials
• Comprising 4 parts : Spray tip, core, cap and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle
(Inner air type : compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid siphon feed type.
| NO. | Components | Standard Material |
| 1 | Spray Tip | S303 |
| 2 | Core | S303 |
| 3 | Cap | S303 |
| 4 | Connector | S303 |
| 5 | Adaptor | S303 |
| 6 | Packing | FKM |
| 7 | Spring Cap | S303 |
