CBIMK-S - Hollow Spray Nozzle (Siphon Type)


Hollow cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 30 μm or less (*1).
Liquid siphon feed type (liquid pressure device is not required).
Spray angle of 60º.

*1) Measured by Laser Doppler Method.

  Thread standard   -
  Pipe conn. size   M3 depth 2
  Standard pressure   -
  Spray angle   60°
  Spray capacity   1.4 - 5.5 ℓ/hr
  Supply air type   Compressed air
  Liquid feeding system   Liquid siphon
  Mean droplet diameter   20 - 30 μm
  Air consumption   27 - 92 ℓ/min, Normal
  Air pressure   0.2 - 0.4 MPa (ca. 2 bar - 4 bar)
  Free passage diameter   0.6 - 0.8 mm


Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil,
               surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.

Structure and Materials

• Comprising 4 parts : Spray tip, core, cap and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle
  (Inner air type : compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid siphon feed type.

NO. Components Standard Material
1 Spray Tip S303
2 Core S303
3 Cap S303
4 Connector S303
5 Adaptor S303
6 Packing FKM
7 Spring Cap S303