CBIMJ - Full Cone Spray Nozzle
Features
Full cone spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*1).
Features large turn-down ratio under liquid pressures of 0.1 – 0.3 MPa (ca. 1 bar – 3 bar).
Spray angle of 20º.
*1) Measured by Laser Doppler Method.
| Thread standard | - |
| Pipe conn. size | M3 depth 2 |
| Standard pressure | - |
| Spray angle | 20° |
| Spray capacity | 0.25 - 38.5 ℓ/hr |
| Supply air type | Compressed air |
| Liquid feeding system | Liquid pressure |
| Mean droplet diameter | 20 - 100 μm |
| Air consumption | 2.6–91 ℓ/min, Normal |
| Air pressure | 0.2 - 0.4 MPa (ca. 2 bar - 4 bar) |
| Free passage diameter | 0.7 - 2.0 mm |
Applications
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit),
oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Structure and Materials
• Comprising 4 parts : Spray tip, core, cap and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle
(Inner air type : compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.
| NO. | Components | Standard Material |
| 1 | Spray Tip | S303 |
| 2 | Core | S303 |
| 3 | Cap | S303 |
| 4 | Connector | S303 |
| Air consumption code | Dimension | Pipe connection size | Mass (g) | ||||||
| L1 | L2 | L3 | L4 | H | Compressed air | Liquid | Fixing | ||
| 005 | 27.7 | 19.2 | 8 | 2.5 | 13 | M5 Depth 3 | M5 Depth 3 | M3x2 | 22 |
| 01 | 27.7 | 29.2 | |||||||
| 02 | 28.0 | 29.5 | |||||||
| 04 | 31.3 | 22.8 | |||||||
| 075 | 32.6 | 24.1 | |||||||
