CBIMV - Flat Spray Nozzle


• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less.
• Features large turn-down ratio under liquid pressures of 0.1–0.3 MPa.
• Produces two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio),
   or a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio).
• Spray angle of 110゚, 80゚, or 45゚.

*1) Measured by Laser Doppler Method.

  Thread standard  -
  Pipe conn. size  M3 depth 2
  Standard pressure  -
  Spray angle  45°, 80°, or 110° 
  Spray capacity  0.25 - 38.5 ℓ/hr
  Supply air type  Compressed air
  Liquid feeding system  Liquid pressure
  Mean droplet diameter  20 - 100 μm
  Air consumption  2.6–91 ℓ/min, Normal
  Air pressure  0.2 - 0.4 MPa (ca. 2 bar - 4 bar)
  Free passage diameter  0.2 - 0.9 mm 


Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil,
               surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.

Structure and Materials

• Comprising four parts: Nozzle tip, core, cap, and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle
  (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.

NO. Components Standard Material
1 Spray Tip S303
2 Core S303
3 Cap S303
4 Connector S303
Air consumption code Dimension Pipe connection size Mass (g)
L1 L2 L3 L4 H Compressed air Liquid Fixing
005 27.7 19.2 8 2.5 13 M5 Depth 3  M5 Depth 3  M3x2 22
01 27.7 29.2
02 28.0 29.5
04 31.3 22.8
075 32.6 24.1