TF-F42 - Flat Air Booster Nozzle

  

Features

• 42-mm wide air nozzle.
• Taking in surrounding air and boosts multiplied air flow.
• Uniform distribution resulting from the unique flat design.
• Max. allowable temperature: [Plastic]120º (245ºF), [Stainless steel] 400° (750ºF)

Blowing Power

Applications

• Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block
Blowing off dust/paint dust, Rejection of inferior products, Blowing off dust for steel plate
• Cooling: Pinpoint cooling for molded plastic


Industries in which this nozzle is used
• Steelmaking
• Machinery
• Electronics
• Paper & Pulp
• Printing
• Food
• Automotives

Structure and Materials

• Standard flat air nozzle (42 mm wide, 90 mm long) with orifice diameter of ø0.8, ø1.0, or ø1.2 mm.
• Multiplies the supplied air volume by taking in surrounding air from inlet holes positioned just before the spray orifices.

TF-F42 S316L

TF-F42 PPS

  

Material : 316L
Mass : 144 g
Max. air pressure : 1.0 MPa (140 psi)
Max. allowable temperature : 400ºC (750ºF)

Material : PPS
Mass : 30 g
Max. air pressure : 0.7 MPa (100 psi)
Max. allowable temperature : 120ºC (240ºF)