PP Spraying Systems - Mark-I Quick Clamp Body

Permits directional adjustment of the nozzle tip anywhere within a 45° included angle.
Interchangeable Nozzle Tips are available in Full Cone, Hollow Cone or Flat Spray styles with various combinations of spray angle and flow rate.
The Mark 1 is also available with a Threaded Ball Connection in 1/8", 1/4", 3/8" and 1/2" NPT or BSP, allowing the use of any threaded plastic, brass or steel nozzle.

Major Dimensions

Features

Inexpensive
Corrosion resistant
Impervious to most chemicals
Good heat resistance
Injection-molded from custom- blended polypropylene
Standard with Single Spring Clamp
Optional Double Spring Clamps for pressures over 4.0 bar
Resists clogging
Directional adjustment of nozzle tip anywhere within 45°
Tips available in Full Cone, Hollow Cone or Flat Spray configurations
Tips available with Threaded Ball Connection in 1/8", 1/4", 3/8" and 1/2" NPT or BSP threads
Nozzle bodies available in three spigot sizes to fit either 17 mm, 21 mm or 14 mm diameter holes on the riser

The Mark 1 and Mark 2 Nozzle Assemblies are colour-coded for convenient identification, and are available to fit the following pipe sizes:

Ordering Instructions

The complete Part Number tells us exactly what assembly you want. For example, let's say that you want to order a Mark 1 Adjustable Nozzle Assembly to fit onto a 32 mm (1 1/4") pipe, with a Single Spring, and with a 65° Flat Spray Nozzle Tip that will deliver 13 lpm at 2.0 bar:

Note: Our standard Nozzle Assemblies are designed with spigots to fit risers with 17 mm diameter holes. We also manufacture assemblies with smaller spigots for 14 mm diameter holes and larger spigots for 20 mm holes. To specify the 14 mm spigots, simply change the ‘UNI’ in the part number to ‘SS’ for Small Spigot or LS for Large Spigot. For a Small Spigot, using the example above, the part number would become: SS 150 6540 M1.